Hitachi NT 32AE, Instruction Manual

Page: 15 / 72

English
15
WARNING
WARNING
Magazine (A) Groove
Nail Strip
ADJUSTING AIR PRESSURE
●
Do not exceed 120 psi
(8.3 bar, 8.5 kgf/cm
2
).
Adjust the air pressure at recommended operating pressure 70 – 120 psi (4.9 – 8.3 bar, 5 –
8.5 kgf/cm
2
) according to the length of nails and the hardness of workpiece.
The correct air pressure is the lowest pressure which will do the job. Using the Nailer at a
higher than required air pressure unnecessarily over stresses the Nailer.
LOADING NAILS
●
When loading nails into Nailer,
1)
do not pull trigger;
2) do not depress push lever; and
3) keep Nailer pointed downward.
(1) 1 Raise the magazine stopper lightly
and pull the lever.
2 Pull the magazine (B) out.
(2) Set nail strip into the magazine (A) and
keep the points of nails in contact with
Groove.
Magazine Stopper
Magazine (B)
Lever