background image

Air Coil Nailer       

                        Http://www.aeroprotools.com   

 

 

 

 

 

 

 

 

 

 

Air Nailer (Coil Nailer)

 

Model No.:            MCN55            MCN55B

 

 
 
 

 

                 

WARNING! 

Even  when  the  tool  is  used  as  prescribed  it  is  not  possible  to  eliminate  all  residual  risk  factors.  The  following 
hazards may arise in connection with the tool’s construction and design:

 

 

 

Damage to hearing if effective hearing protection is not worn. 

 

Health defects resulting from vibration emission if the power   

tool is being used over longer period of time or not adequately   

managed and properly maintained. 

 

Wear eye protection. 

 

Content

 

1 Technical data                                                                          2.7 Actuating systems   

1.1 Fastener                                                                                3 Compressed air system     

1.2 Accessories                                                                          4 Preparing the tool for use   

1.3 Description/Features                                                          4.1 Preparing a tool for first operation       

1.4 Location of Parts                                                                4.2 Connection to the Compressed air system                       

2 Special references                                                                  4.3 Filling the magazine     

2.1 Regulations                                                                          4.4 Handling the tool       

2.2 Noise emission                                                                    5. Maintenance 

2.3 information on mechanical impact (vibration)                  6 Troubleshooting 

2.4 Safety of fastener driving tool                                            7 explode drawing 

2.5 Safety at work                                                                      8 Spare parts list 

2.6 Triggering devices                               

2015 

OPERATING  INSTRUCTIONS  FOR  FASTENER  DRIVING 

TOOLS OPERATED BY COMPRESSED AIR

 

IMPORTANT:   

Read all safety rules and operating Instructions carefully 
before first use it. Keep this Manual for future reference. 

Summary of Contents for MCN55









Reviews: