--- 36 ---
Do not widen the clearance between
the ribs when aligning.
Motor Mount
[8]
(b) Reassembly
Disassembly procedures should be followed in the reverse order. Note the following points.
Apply designated oil (Code No. 885-546, Code No. 885-246) to the O-ring
[15]
and the Mount Sleeve
[9]
.
Mount the Mount Sleeve
[9]
with the uneven surface faced outward.
Align the end of the Motor Spring
[12]
with the center of the Motor Mount
[8]
and rotate it as shown in Fig. 27.
Set the Cylinder Head
[14]
and the Motor Mount
[8]
as shown in Fig. 28 and secure with the Hex. Socket Set
Screw M4 x 5
[31]
. At this time, lightly press the Motor Mount
[8]
in "A" direction to prevent the Motor Mount
[8]
from floating.
Fig. 28
Motor Spring
[12]
Cylinder Head
[14]
Fig. 27
Motor Mount
[8]
Motor Spring
[12]
Motor Mount
[8]
Setting position
Position after rotation
End
End
