manualshive.com logo in svg

Hitachi NR 83A2, Technical Data And Service Manual

The Hitachi NR 83A2 is a powerful and reliable nail gun for professional use. Ensure safe and efficient operation by referring to the Instruction And Safety Manual. Download the comprehensive manual for free from manualshive.com, providing step-by-step guidance and essential safety tips. Unleash the full potential of your tool with this easily accessible resource.

Share
Download
background image

--- 13 ---

Body Ass'y [25]

Part

NR 83A2

NR 83A

Air escape groove

Caution

5.7 mm dia. hole

M8 female screw

Grip rubber

5.7 mm dia. hole

Grip tape

2

      Parts that were newly designed or changed for the Model NR 83A2 and not interchangeable with the Model

      NR 83A (except the parts described in      )

1

The body ass'y is not
interchangeable because the
mounting method to the
magazine section is different.

(Besides, the body ass'y for
the Model NR 83A2 is
provided with an air escape
groove.)

Hex. Socket Hd.
Bolt (W/Flange)
M6 x 45 [1]
(For mounting the
Top Cover [2])

Part

NR 83A2

NR 83A

Top Cover [2]

M6 x 25

Caution

Hex. Socket Hd.
Bolt (W/Flange)
M6 x 45 [1]

M6 x 45

Spring washer

Exhaust Cover [4]

Hex. Socket Hd.
Bolt (W/Sp. Washer)
M6 x 25 [3]

Spring washer

Hex. Socket Hd.
Bolt (W/Sp.
Washer) M6 x 25
[3]
(For mounting the
Exhaust Cover [4])

3

      Parts that are interchangeable as assemblies

The hex. socket hd. bolt
M6 x 45 and the spring
washer for the Model NR 83A
are interchangeable as an
assembly.

The hex. socket hd. bolt
M6 x 25 and the spring
washer for the Model NR 83A
are interchangeable as an
assembly.

The parts of the output section except the above are common to those of the Model NR 83A.

NR 83A2: Fixed by a nylock
                 bolt (W/Flange)
                 M8 x 16
NR 83A:   Fixed by two hex.
                 socket bolts
                 M5 x 25 with nylon
                 nuts

Summary of Contents for NR 83A2















































Reviews:

No comments

Related manuals for NR 83A2

UFO NSDCN65SP Operation Manual preview
NSDCN65SP
Brand: UFO Pages: 10
HIKOKI NR 90AD Handling Instructions Manual preview
NR 90AD
Brand: HIKOKI Pages: 52
RIDGID 305311411 Operator'S Manual preview
305311411
Brand: RIDGID Pages: 40
Michelin 68790575 Operating Instructions Manual preview
68790575
Brand: Michelin Pages: 48
pro.point 8561144 User Manual preview
8561144
Brand: pro.point Pages: 39
Bostitch BTF83PL Operation And Maintenance Manual preview
BTF83PL
Brand: Bostitch Pages: 36
PRO-PULSE 64315015 Operator'S Manual preview
64315015
Brand: PRO-PULSE Pages: 18
Rapid EG360 Operating Instructions Manual preview
EG360
Brand: Rapid Pages: 116
Neilsen CT3069 Instructions Manual preview
CT3069
Brand: Neilsen Pages: 6
RAMSET T3MAG Instruction Manual preview
T3MAG
Brand: RAMSET Pages: 22
Paslode CF325Li Operating Manual preview
CF325Li
Brand: Paslode Pages: 40
Parkside PNKP 105 A1 Translation Of The Original Instructions preview
PNKP 105 A1
Brand: Parkside Pages: 76
Parkside PNKP 105 B1 Translation Of The Original Instructions preview
PNKP 105 B1
Brand: Parkside Pages: 134
Grizzly H8175 Instruction Sheet preview
H8175
Brand: Grizzly Pages: 4
Full Boar FBABN-G15 Instruction Manual preview
FBABN-G15
Brand: Full Boar Pages: 23

Brands by name

Popular brands

Load more brands