background image

25

Installation of the Projector

Throw distance

Throw Distance (TD) = Screen Width (W) x Throw Ratio (TR)

 

Throw Distance(TD)

Screen Width(W)

Coupled with the available projection lenses, the projector offers the following throw ratios:

• 

FL-920(FL-900) (0.32 : 1   100-350inch)

• 

USL-901 (0.76~0.95 : 1   50-600inch)

• 

SL-902 (1.14~1.72 : 1   50-600inch)

• 

SD-903 (1.61~2.44 : 1   50-600inch)

• 

ML-904 (2.38~3.64 : 1   50-600inch)

• 

LL-905 (3.47~5.63 : 1   50-600inch)

• 

UL-906 (5.53~8.79 : 1   50-600inch)

Note:

Projection lenses are optional accessories. 
Please contact your local dealer to acquire 
the projection lens that suits your need 
most.

Modes of installation

• 

 Install the projector in an environment below 40°C (104°F). The projector should be kept clear from 
sources of heat and / or ventilation openings of air conditioner.

• 

 The projector should be kept away from devices that emit electromagnetic energy, such as motor 
and transformer. Common devices that emit electromagnetic energy include slideshow system, 

speakers, power amplifiers and elevators.

• 

 If you choose to install the projector on the ceiling, be sure to use the ceiling installation 

components manufactured by manufacturer-certified vendors. For details, please contact your local 

dealer.

Front Tabletop 

Advantages:   easy to install can be easily   moved 

or adjusted easy to operate.

Disadvantage:  occupies floor space and limits 

seating capacity.

    

Lotus

Summary of Contents for LP-WU9750B



























































































Reviews: