![background image](http://html.mh-extra.com/html/hitachi/le46h508/le46h508_owners-manual_142709013.webp)
13
EN
Starting setup
The Setup Wizard appears the first time you turn on the TV,
and assists you to specify the Air/Cable setting, and program
your channels automatically.
IMPORTANT: Make sure that the antenna or cable TV system
connection is made.
1
To turn on the TV, press
POWER
. (It may take approx. 10
seconds for a picture to appear on screen.) The Initial Setup
Wizard begins.
2
Select your “TV Mode” by pressing
▲ or ▼ to select “Home”
or “Retail”. This product qualifies for ENERGY STAR in Home
mode with its default settings.
NOTE:
Retail mode is intended for in-store display and resets video
settings each time TV is turned on.
3
Press ▶ to go to the next step.
4
Press
▲ or ▼ to your desired language, then press ▶ to go to
the next step.
5
Press
▲ or ▼ to select your time zone, then press ▶.
• In the rare event that you live within broadcast range of two
stations in two different time zones, the TV may recognize
the wrong station for the auto clock set.
6
Press
▲ or ▼ to your desired time format, then press ▶.
7
Press
▲ or ▼ to select signal type that you using, then press
▶.
8
Auto Channel Scan will begin. After the scan is completed,
a TV channel appears on the screen.
• Depending on the reception condition, it may take up to 30
minutes to complete scanning channels. Please allow the
process to complete without interruption.
NOTE:
• If you press
EXIT
during the “Auto Channel Scan” process, the
Auto Channel Scan will stop and the TV will change to the normal
view.
• When you make a menu selection, your changes occur
immediately. You do not have to press
EXIT
to see your changes.
TV operation
1
To turn on the TV, press
POWER
. (It may take approx.10
seconds for a picture to appear on screen.)
2
Adjust the volume level by pressing
VOL (VOLUME) +
or
–
.
The volume level will be indicated on the screen by a volume
bar.
If the volume increases, the number of bars also increases.
If the volume decreases, the number of bars also decreases.
3
Set the Source option to the appropriate selection (see “Air/
Cable selection” on page 18).
4
Press the
Direct Channel Selection Buttons (0-9, –)
to
select the channel.
TO SELECT ANALOG CHANNELS
1-9:
Press
1-9
as needed. Example, to select channel 2,
press
2
, then press
SELECT
..
10-99: Press the 2 digits in order. Example, to select
channel 12, press
1
,
2
, then press
SELECT
.
100-135: Press the 3 digits in order. Example, to select
channel 120, press
1
,
2
,
0
, then press
SELECT
.
TO SELECT DIGITAL CHANNELS
Press the first digits, then press the
–
button followed by the
remaining number.
Example: To select channel 15-1, press
1
,
5
,
–
,
1
, then press
SELECT
.
•
I
f a channel is selected with only audio content, “Audio Only”
will be displayed on the screen.
• If a channel is selected with a weak digital signal, “Weak or
No Signal” will be displayed on the screen.
• The same program may be available on either an analog
channel or a digital channel. You may choose to watch
either format.
VHF/UHF/CABLE CHANNELS
Air
Cable
VHF
2-13
VHF
2-13
UHF
14-69
STD/HRC/IRC
14-36
(A) (W)
37-59
(AA) (WW)
60-85
(AAA) (ZZZ)
86-94
(86) (94)
95-99
(A-5) (A-1)
100-135 (100) (135)
01
(4A)
NOTE:
• If a channel with no broadcast is selected, the sound will
automatically be muted.
• It may take a few seconds for a digital channel picture to appear
on screen after being selected.
To select the video input source
To view a signal from another device connected to your TV, such
as a VCR player, press
INPUT
, then press ▲ or ▼ to select the
desired input, then press
SELECT
.