Hitachi LE24C109 Owner'S Manual Download

Page: 7 / 44

The unit emits heat when in operation. Do not place any covers or blankets on the unit, this

may cause overheating. Do not block ventilation holes, or set up near radiators. Do not place

in direct sunlight. When placing on a shelf leave 4 inches (10 cm) free space around the

entire unit.

Securing to a Wall

Use metallic wire (not provided), screw and clamp on the rear of the TV as shown below.

Keep the TV 4 inches away from the wall, except when mounted using the wall mount

bracket, and secure to the wall as shown below:

Wire

4 inches

Wire

Clamp

Screw

NOTICE FOR TV CABINET

If the unit is placed on a cabinet smaller than the length of the unit, it could result in instability

and the unit may tumble over, making a risk of personal, possibly fatal injury. Also, this would

seriously damage the product. Accordingly, Hitachi accepts no responsibility or liability for

any injuries or property damage resulting from the improper installation.

NO !!

YES !!

SAFETY PRECAUTIONS

4 inches

Y(VIDEO)

4 inches

Y(VIDEO)

4 inches

Y(VIDEO)

Summary of Contents for LE24C109













































Search results

Summary of Contents for LE24C109

Reviews:

Related manuals for LE24C109

Brands by name

Popular brands

Hitachi LE24C109, Owner'S Manual

Search results

Summary of Contents for LE24C109

Reviews:

Related manuals for LE24C109

Brands by name

Popular brands