Hitachi LE24C109 Owner'S Manual Download

Page: 14 / 44

Antenna connections

If you are using an indoor or outdoor antenna, follow the instructions below that

correspond to your antenna system. If you are using a Cable TV service, see Cable

TV connections.

Combination VHF/UHF Antenna (Single 75 ohm cable)

Connect the 75 ohm cable from the combination VHF/UHF

antenna to the Antenna Jack.

75 ohm

Coaxial

Cable

Antenna

Jack

Cable TV connections

For basic Cable TV service not requiring a Converter/

Descrambler box, connect the 75 ohm Coaxial Cable

directly to the Antenna Jack on the back of the TV.

For subscribers to scrambled Cable TV service

If you subscribe to a Cable TV service which requires the use of a Converter/Descrambler

box, connect the incoming 75 ohm Coaxial Cable to the Converter/Descrambler box. Using

another 75 ohm Coaxial Cable, connect the output jack of the Converter/Descrambler box to

the Antenna Jack on the TV. Follow the connections shown below. Set the TV to the output

channel of the Converter/Descrambler box (usually channel 3 or 4) and use the Converter/

Descrambler box to select channels.

For subscribers to unscrambled Cable TV service with scrambled

premium channels

If you subscribe to a Cable TV service in which basic channels are unscrambled and

premium channels require the use of a Converter/Descrambler box, you may wish to

use a signal Splitter and an A/B Switch box (available from the Cable TV company or an

electronics supply store). Follow the connections shown below. With the switch in the “B”

position, you can directly tune any non-scrambled channels on your TV. With the switch

in the “A” position, tune your TV to the output of the Converter/Descrambler box (usually

channel 3 or 4) and use the Converter/Descrambler box to tune scrambled channels.

This TV has an extended tuning range and can tune most cable channels without

using a Cable TV Converter box. Some cable companies offer “premium pay

channels” where the signal is scrambled. Descrambling these signals for normal

viewing requires the use of a descrambler device which is generally provided by the

Cable TV company.

For subscribers to basic Cable TV service

Incoming 75 ohm

able TV Cable

75 ohm Cable to TV

Antenna

Jack

Converter/

Descrambler

Splitter

Incoming

75 ohm

able TV

Cable

A/B Switch

75 ohm Cable

to TV

Converter/

Descrambler

Antenna

Jack

75 ohm

Coaxial Cable

Antenna

Jack

75 ohm

Coaxial Cable

Antenna

Jack

75 ohm

Coaxial Cable

Antenna

Jack

Summary of Contents for LE24C109













































Search results

Summary of Contents for LE24C109

Reviews:

Related manuals for LE24C109

Brands by name

Popular brands

Hitachi LE24C109, Owner'S Manual

Search results

Summary of Contents for LE24C109

Reviews:

Related manuals for LE24C109

Brands by name

Popular brands