For any help concerning set up and use of your TV please call the Customer Helpline: 0845 604 0105
Accessing Installation Menu
1.
Press
“MENU”
button on the remote control and
select
Installation
by using
“ ” or “ ”
button.
2.
Press “
OK”
button and the
Installation
screen will be
displayed.
Automatic Channel Scan (Retune)
1.
In the Installation menu, select “
Automatic Channel
Scan (Retune)
” by using
“
”
or
“
”
button and press
OK
button .
2.
Options will be displayed. You can select options by
using
“
” or “
”
and
OK
buttons.
Menu Operations
Digital Aerial: Searches and stores aerial DVB stations.
Analogue: Searches and stores analogue stations
Digital Aerial & Analogue: Searches and stores aerial
DVB and analogue stations.
3.
Whenever you select an automatic search type and
press
OK
button, a confi rmation screen will appear on
the screen. To start installation process, select
Yes
, to
cancel select
No
by using
“ ”
or
“ ”
and “
OK”
button.
4.
After auto channel scan type is set and selected and
confi rmed, installation process will start and progress
bar will move along. If desired, press
“MENU”
button
to cancel process. In such a case, located channels
are not stored.
Manual Channel Scan
1.
In the Installation menu, select “Manual Channel Scan”
by using
“
”
or
“
”
button and press
OK
button.
2.
Manual Scan options screen will be displayed.
Select the desired “Search Type” using
“ ” or “ ”
button.
Manual search options will change accordingly.
3.
Enter the multiplex (for digital manual s
earch) or
frequency
number (for analogue manual search) using
the numeric buttons and press OK button to start search.
Analogue Fine Tune
1.
Select “Analogue Fine Tune” from the Installation menu
by using
“
”
or
“
”
and
OK
buttons. Analogue fi ne tune
screen will be displayed.
NOTE: Analogue Fine Tune feature will not be
available if there are no analogue channels, digital
channels and external sources stored.
2.
Press
OK
button to proceed. Use
“ ”
or
“ ”
button
to set Fine Tune. When fi nished, press
OK
button again.
First Time Installation
Deletes all stored channels and settings, resets TV to
factory settings and starts fi rst time installation.
1.
Select
First Time Installation
option and press
OK
button if you would like to reset the TV.
2.
A warning screen will be displayed. Select
YES
and press
OK
to continue. All prestored channels and
settings will be deleted in such a case.
3.
The TV will reset after a short time and language
selection menu will be displayed.
You will be asked to enter the PIN number to start
process if the TV has been set up with Digiturk option.
Factory-default PIN number is 0000.
4.
Follow the steps in the
Initial set up
section.
Clear Service List
(*) This setting is visible only when the Country option is set to
Denmark, Sweden, Norway or Finland.
1.
Use this setting to clear channels stored. Press “
” or “
” button to select
Clear Service List
and then press
OK
.
2.
An OSD message will be displayed on the screen.
Press
OK
to cancel or select Yes to delete all of the
stored channels.
Insallation Controls
General TV Operation
31
01_[GB]_MB90_5112UK_DVBT_EXTENDED_IB_46940LED_BRONZE25_10080161_50228642.indd 31
03.09.2012 18:10:59
