English
- 17 -
Note
: If the Country option is set to Denmark, Sweden,
Norway or Finland, the Language Settings menu will function
as described below:
Language Settings
In the con
fi
guration menu, highlight the Language
Settings item by pressing “ ” or “ ” buttons. Press
“
OK
” and Language Settings submenu will be
displayed on the screen:
Use “ ” or “ ” buttons to highlight the menu item
that will be adjusted and then press “ ” or “ ” button
to set.
Notes
:
• System Language determines the on-screen menu
language.
• Audio Language is used for selecting the soundtrack
of a channels.
• Primary settings are the
fi
rst priority when multiple
choices are available on a broadcast. Secondary
settings are the alternatives when the
fi
rst options
are not available.
Installation
The Installation menu is mainly intended to help you
for creating a Channel Table in the most ef
fi
cient way.
Select Installation from the Con
fi
guration menu by
pressing “ ” or “ ” buttons.
This menu includes the following items:
(*) For Denmark, Sweden, Norway or Finland.
Automatic Channel Scan
Automatic channel scan is started by pressing
“
OK
” button while Automatic channel scan item is
highlighted.
The following message appears on the screen:
Highlight Yes or No by using “ ” or “ ” buttons and
press “
OK
” button to con
fi
rm.
If Yes is selected, automatic search starts.
Selecting No cancels automatic search.
After search is completed for digital channels, a
message asking whether to search for analogue
channels appears on the screen:
Press the “
OK
” button to search for analogue
channels. The following menu appears on the screen
for analogue channel search:
Select your
Country
,
Language
and
Text language
by using “ ” or “ ” and “ ” or “ ” buttons. Press
“
OK
” or
RED
button to continue. To cancel, press
BLUE
button. The following menu will be displayed
during the automatic tuning:
After APS is
fi
nalized, the programme table will appear
on the screen. In the programme table you will see
the programme numbers and names assigned to the
programmes.
Manual Channel Scan
In manual channel scan, the number of the multiplex is
entered manually and only that multiplex is searched
for the channels. For each valid channel number, signal
level and signal quality are shown on the screen.
A01_MB45_[GB]_1800UK_IDTV_BRONZE11_19856W_10066446_50159846.indd 17
A01_MB45_[GB]_1800UK_IDTV_BRONZE11_19856W_10066446_50159846.indd 17
12.02.2010 14:44:08
12.02.2010 14:44:08
