Hitachi L19H01 CB, Instruction Manual

Page: 20 / 38

Using Conditional Access Module (CAM)
The Conditional Acc
A
Conditional Access Module (CAM) is an electronic device, usually incorporating a slot for a smart card, which
equips a DVB television or set-top box with the appropriate hardware facility to view conditional access content
that has been encrypted using a conditional access system. They are normally used with direct broadcast satellite
services, although the UK digital terrestrial pay TV supplier Top Up TV also uses CAMs.
The module can be inserted into the Common Interface (CI) slot located at the backside (facing downwar-
ds) of the TV.
ess Module (CAM) menu provides access to functions contained on the CAM.
Note
This Conditinal Access Module (CAM) does not come with the TV set. It can only be obtained when you subscribe
to service providers like Pay TV or other service providers.
IMPORTANT
Always switch the TV off before inserting or removing the module.
Inserting the CAM
1. Switch off the TV.
2. Some modules come with a viewing card. When using this type of module, first insert the viewing card into
the module. Ensure that the arrow on the viewing card faces the arrow of the module before inserting into
the module slot.
3 . Insert the module into the Common Interface (CI) slot on the
4 . Switch on the TV.
TV at the rear panel.
5 .
Press the MENU key to display the OSD menu.
6 .
Use the
Ÿ / ź
key to
highlight “
Setup ” menu
and p
ress the
OK
key.
7 .
Press the
Ÿ / ź
/
Ÿ / ź
key to enter into the “ Cl information” menu and
8 .
Press
OK
key as indicated on the screen to access the CAM’s functions.
IMPORTANT
If no module is inserted, the Conditional Access
Module menu will display "Scrambled Program".
If the module is not inserted properly, a warning
message will show on the screen to remind the
users. If you have inserted a module, please
ensure it is fully inserted in the correct manner
as mentioned in Step 2 above.The functions that
now appear on screen are dependent on the
contents of the selected Conditional Access
Module in your country. Refer to the instruction
supplied with the module or contact the vendor.
p ress the OK key
Module
Connectors at rear of
TV(facing downward)
Common interface
ANTENNA
HDMI 1 HDMI 2
(CAM)
19
Preparation
Installing
the
LCD
TV
Using
The
Features
Troubleshooting
Specifications
Using
The
TV
Features
Introducing
the
LCD
TV