Hitachi L19H01 CB, Instruction Manual, Page: 14 / 38

Connecting a TV Cable or an Antenna
a. Press MENU button on the remote to enter Control Menu. Press or to select SetUp.
b. Press the OK button to confirm the entry of the submenu. Auto Installation will highlight in red,
then press OK button to confirm and input the PIN "0000" to the submenu. Press or
to select your chosen country, and press OK to confirm the selection. Press button again
to start the search. Press OK to enter the submenu, then select YES and OK to start the scanning.
E#HVGTCHGYOKPWVGU[QWYKNNUGGVJG68RTQITCOOGUDTKGƀ[CUGCEJEJCPPGNKUTGEGKXGFCPF
UVQTGFKPVJGOGOQT[9JGPKVKUEQORNGVGFRTGUU%*DWVVQPUVQXKGYVJGUVQTGFEJCPPGNU
Refer to the owner’s manual of the external equipment to be connected. When connecting external
equipment, do not connect any AC power cords to wall outlets until you ha
X e completed all the
connections.
Basic Connection: Connecting an aerial
Connect your existing TV aerial to the Aerial input socket on the TV.
The Aerial input socket can be connected with the ATV/DTV Aerial.
A good quality outdoor aerial is recommended.
Connect all AC power sources before turning on the power switch at the back of the TV.
Press the STANDBY button on your remote to turn on your LCD TV.
Turn the POWER SWITCH of rear TV on, and the red light will show on the front panel of the TV.
d. To power off press the STANDBY button, and the blue illuminated symbol will change to red.
The red light will change to blue light.
Insert the supplied mains cable to the mains socket located on the rear of the TV.
Connect the other end of this cable to the mains socket.
n
o
p
q
TV Aerial
Aerial/75-ohm coaxial input
Connect the AC IN
socket at back of the TV.
Unplug from a wall outlet
AC IN
ON/OFF SWITCH
13
Preparation
Installing
the
LCD
TV
Using
The
Features
Troubleshooting
Specifications
Using
The
TV
Features
Introducing
the
LCD
TV