Hitachi L100 IP Series, Instruction Manual

Page: 62 / 94

Chapter 9 – Messages
9-2
Other messages
Cause Display
The inverter is currently in standby mode
or
There is an active reset signal.
The mains power supply has been switched off.
The waiting time prior to automatic inverter restart is
coming to an end (refer to functions b 01 and b 03 ).
The factory standard settings have been selected
and the inverter currently is in its initializing phase
(refer to functions
b 84 and b 85 ). The parameters
for the European market (EU) are loaded. For non-
European inverter models there are versions for
North America (USA) and Japan (JP).
The trip history register is being initialized.
The copy unit is carrying out a copy operation.
No data available
(this may be displayed under functions d 08 and d 09
when the trip history register is empty, or under d 04
when PID control is not active).