ENGLISH
3.1 UNIT INSTALLATION
3.1.1
,QLWLDOFKHFN
Check to ensure that the following accessories are packed with
the unit.
N O T E
,IDQ\RIWKHVHDFFHVVRULHVDUHQRWSDFNHGZLWKWKHXQLWSOHDVHFRQWDFW
\RXUFRQWUDFWRU
Accesory
Appearance
Quantity
Duct adapter
4
Screw
Washer
Nut
9LEUDWLRQ$EV5XEEHU
4
Rubber duct joint
4
3.1.2
,QVWDOODWLRQ
Install the KPI unit with a proper clearance around it paying
careful attention of installation direction for the piping, wiring and
maintenance working space, as shown below.
Service space
•
Install the unit with a proper clearance around it for operation
DQGPDLQWHQDQFHZRUNLQJVSDFHDVVKRZQLQEHORZ¿JXUH
•
Consider the air distribution from the unit to the space of
the room, and select a suitable location so that uniform air
temperature in the room can be obtained.
.3,((
(mm)
.3,;(
(mm)
•
Avoid obstacles which may hamper the air intake or the air
GLVFKDUJHÀRZ
•
Select a position for introducing the outside air where no
H[KDXVWRUFRPEXVWLRQJDVHVZLOOEHVXFNHGLQWRWKHXQLWDQG
where it will not be covered by snow.
0RXQWLQJWKHVXVSHQVLRQEROWV
1
Preparing the sling Bolts.
Rubber isolator
$QFKRUEROW0RU0
Nut
Nut
Washer
2
Hanging the Unit.
-
Hang the suspension bracket on the anchor bolts and
DGMXVWLQVXFKDZD\WKDWWKHXQLWLVLQVWDOOHGKRUL]RQWDOO\
-
Tighten up securely using double nuts in order to prevent
looseness.
C A U T I O N
:KHQVXVSHQGLQJWKHPDLQXQLWIURPWKHFHLOLQJGRQRWKDQGOHLWLQVXFK
DZD\WKDWIRUFHZLOOEHDSSOLHGWRWKHFRQWUROER[
N O T E
,QFDVHWKDWVOLQJEROWVDUHWRRVKRUWUHDWWDFKWKHVXVSHQVLRQEUDFNHWLQ
DQDOWHUQDWLYHSRVLWLRQ
3
Remove the screws at the top mounting position.
4
Remove the suspension bracket and attach them at higher
mounting position.
5
Tighten up the screws in the screw hole where the
suspension brackets were removed in order to prevent air
leaks.
KPI unit
5 m
Nut
Washer
Anchor bolt
Rubber isolator
KPI UNITS INSTALLATION
PMML0371A rev.1 - 08/2016
