11. Notes to users
Co
pply.
Us
e.
Pr
ower cable are correct ,
referring to the connection diagram
To protect CCD (sensor)
Do not touch the glass surface of the CCD sensor to avoid det
on in picture q
and s
If the glass surface of the sensor should become dusty or dirty , remove dust or di
lly with a
cotton-tipped applicator. Do not wipe the surface with dry clo
per tissue to avoid possible
Protection of camera
Do not use or store the camera under direct sunlight , at a place exposed to rain or snow , or at a
place where flammable or corrosive gas is present.
When housing the camera in a camera case , use the utmost care regarding rise of internal
temperature.
hen casing the camera , the temperature normally rises by 10 to 20
℃
, compared with the outside air
temperature. The camera operates in the temperature range from -5 to 45
℃
. If the camera is used
or left in high temperature environment for hours , the life of the camera may be shortened.
Do not drop the camera. Do not apply strong shock or vibration to the camera.
Before connecting or disconnecting a connector , turn off the camera and be sure to hold connector
body to connect or disconnect the connector.
Mutual interference noise can occur if multiple cameras are arranged in close proximity. Separate
the cameras to the extent possible.
are installed directly into other equipment , external noise can prevent a normal
ample care when installing and arranging.
regions using 50 Hz power line frequency , flicker can appear on the monitor screen from light
nt or mercury. In such cases , release the auto electronic shutter.
17
Power supply
nnect a 12V DC voltage (11 to 13V) from an external regulated DC power su
e a stable power supply without ripple and nois
ior to turning on the power switch , check that the polarities of the p
eriorati
uality due to dirt
cratches.
rt carefu
th or pa
damage to the glass surface by static electricity.
W
Camera arrangement
When camera units
picture. In such cases , shield the camera units.
The camera can be damaged by static electricity. Use
Auto electric shutter
In
sources such as fluoresce
