Hitachi HV-F202SCL, Operation Manual

Page: 20 / 43

7
(10) WHITE BALANCE : Setting of white balance.
-MODE- : Selection of mode
ATW : White balance is adjusted in real time (automatic tracking).
MANUAL (Factory setting) : White balance is adjusted manually by adjusting R, G and B GAIN.
ADJUST
: State for automatic white balance adjustment.
-R GAIN- : Adjust red gain
0 to 255 : Red gain is reduced at 0 side and raised at 255 side (Factory setting is 128).
-B GAIN- : Adjust blue gain
0 to 255 : Blue gain is reduced at 0 side and raised at 255 side (Factory setting is 128).
(11)
MASKING : Setting of 6 vector independent making (primary color R G B and complementary color Ye Cy Mg
saturation and hue can be separately varied).
-MODE- : Selection of mode
OFF (Factory setting)
: Not use masking functions.
ON : Use masking functions.
-R SATURATION- : Adjust red saturation
0 (Factory setting) to 255 : Adjust red saturation in 256 steps.
-R HUE- : Adjust red hue
0 (Factory setting) to 255 : Red come near to yellow at 0 side and come near to cyan at 255 side.
-Cy SATURATION- : Adjust cyan saturation
0 (Factory setting) to 255 : Adjust red saturation in 256 steps.
-Cy HUE- : Adjust cyan hue
0 (Factory setting) to 255 : Cyan come near to red at 0 side and come near to green at 255 side.
-G SATURATION- : Adjust green saturation
0 (Factory setting) to 255 : Adjust red saturation in 256 steps.
-G HUE- : Adjust green hue
0 (Factory setting) to 255 : Green come near to cyan at 0 side and come near to magenta at 255 side.
-Mg SATURATION- : Adjust magenta saturation
0 (Factory setting) to 255 : Adjust red saturation in 256 steps.
-Mg HUE- : Adjust magenta hue
0 (Factory setting) to 255 : Magenta come near to green at 0 side and come near to blue at 255 side.
-B SATURATION- : Adjust blue saturation
0 (Factory setting) to 255 : Adjust red saturation in 256 steps.
-B HUE- : Adjust blue hue
0 (Factory setting) to 255 : Blue come near to magenta at 0 side and come near to yellow at 255 side.
-Ye SATURATION- : Adjust yellow saturation
0 (Factory setting) to 255 : Adjust red saturation in 256 steps.
-Ye HUE- : Adjust yellow hue
0 (Factory setting) to 255 : Yellow come near to blue at 0 side and come near to red at 255 side.
(12)
PAINT BLACK : Setting of paint black (color level of R, G, and B can be separately varied).
-MODE- : Selection of mode
OFF (Factory setting) : Not use paint black functions.
ON : Use paint black functions.
-RED- : Adjust red color level
0 (Factory setting) to 255 : Adjust red color level in 256 steps.
-GRREN- : Adjust green color level
0 (Factory setting) to 255 : Adjust green color level in 256 steps.
-BLUE- : Adjust blue color level
0 (Factory setting) to 255 : Adjust blue color level in 256 steps.
(13)
WHITE SHADING : Setting of white shading correction.
Color shading may occur in the vertical direction on screen due to any characteristic of lens. This camera is equipped with a
function for correcting color shading automatically.
-MODE- : Selection of mode
OFF (Factory setting)
: Not perform white shading correction.
ON : Perform white shading correction.