Hitachi HV-F202SCL, Operation Manual

Page: 15 / 43

2
Section name and functions
Camera mounting
Attached optional accessory the tripod adaptor "TA-F202", mount the camera to a tripod or mounting bracket.
Lens
Selecting a lens
The proper lens is important for obtaining adequate performance from the camera.
Especially in the case of a three elements CCD system C mount camera, the lens
incidence and exit distances are important. If separation is too short, color
irregularity Is apt to occur at the top and bottom of the image.
Conversely if too long, where the lens iris is a nearly fully open, resolution is
impaired, while shading and flare can seriously detract from image quality. When
using 3 CCD color system camera, it is also recommended to use a lens designed
for this purpose.
Screw type: Ｕ1/4-20
Length Ｌ = 4 to 5.5mm
Screws longer than 5.5 mm can cause internal damage, while less
than 4 mm prevents secure fastening and risks dropping to cause
damage and injury.
Ｄ.ＯＵＴ ２
ＤＣ ＩＮ/ＳＹＮＣ
Ｄ.ＯＵＴ １
ＭＯＤＥＬ
Ｓ
Ｅ
Ｅ
Ｍ
Ａ
Ｎ
Ｕ
Ａ
Ｌ
Ａ
Ｐ
Ｅ
Ｒ
Ｃ
Ｅ
Ｖ
Ｏ
Ｉ
Ｒ
Ｍ
Ａ
Ｎ
Ｕ
Ｅ
Ｌ
ＰＬＡＴＥ
，Ｒ
ＡＴＥＤ
Ｓ
ＥＲ.
ＮＯ
.
CameraLink connectors
Use for digital video output
and camera control signal
input/output signal.
Camera / Tripod adaptor
mounting screw holes
Lens mount
（C mount）
DC IN/SYNC connector
Use for DC+12V power or external
trigger / VD signal input or Flash /
VD output
Camera / Tripod adaptor
mounting screw holes
CAUTION
Observe the dimensions of the lens mounting selection as
illustrated at the right.
If the dimensions are not observed, do not use such a lens,
because the lens and the camera will be damaged.
Lens flange
Lens optics
Max 4mm
L