Hitachi HV-F202SCL, Operation Manual

Page: 14 / 43

1
Overview
HV-F202SCL is high precision 3CCD progressive scan color camera, which has single chip digital processing LSI, a C
mount prism, 1/1.8 inch 2,000,000 pixels square CCD and CameraLink interface.
Standard composition
Check when unpacking
Camera ········································································································ 1
Installation guide ····················································································· 1
Plug for DC IN/SYNC connector (HR10A-10P-12S) ············· 1
Features
・High resolution and color fidelity
The 1/1.8-inch 2.02 million pixels square lattices progressive scan CCD and dichroic prism for RGB color achieves a high
resolution of UXGA picture and good color reproduction.
・Small and lightweight
The small SDR connector for digital output allows the camera size and mass to be drastically reduced to 55(W) x 55(H) x
89(D) mm / approx. 350g.
・Various picture quality enhancement
Independent size color masking is the Hitachi innovation for optimizing color balance. Saturation and hue of 6 colors (Red,
Green, Blue, Cyan, Magenta and Yellow) can be adjusted independently to deliver the best color in image capture,
microscope and other applications.
In-out gradation control can be arbitrarily adjusted by using LUT.
・Auto shading correction
Color shading due to aberration of the lens is automatically compensated or reduced.
・Versatile CCD drive functions
Video frame capture on demand using external trigger signal
Long integration mode (max. 10 seconds)
Variable shutter mode (min. 1/100,000 second)
Auto electronic shutter mode
System example
HV-F202SCL connects to frame grabber board using Mini-CameraLink cable.
HV-F202SCL
AC adaptor
CameraLink
frame grabber board
Mini-CameraLink cable
(x 2 when Medium configuration)
HITACH
3CCD
Camera cable (C-201KSS) / Mini-CameraLink cable
Clamp filter
(ZCAT 2035-0930A: TDK)
Approx. 100 to 150 mm
In the CE Marking region, use following specified cables and clamp filters
Camera cable
Optional accessories
(1) 12 pin plug
HR10A-10P-12S(01)
(2) Junction box JU-F30/JC-100
(3) Tripod adaptor TA-F202
(4) Mini-CameraLink cable
(CameraLink standard conformity)
(5) Cameracable
Molded type Shield type
2m C-201KSM C-201KSS
5m C-501KSM C-501KSS
10m C-102KSM C-102KSS
In the CE Marking region, use the shield type and attach clamp filter (ZCAT 2035-0930A:
TDK) at both ends (camera and video processor ends). Refer to System example.
Note : When not using the specified junction box, Mini-CameraLink cable, camera cable and
clamp filter, malfunctions may be caused.