manualshive.com logo in svg

Hitachi HUS151414VL3600, Specifications

The Hitachi HUS151414VL3600 is a high-performance storage solution designed to meet the demanding needs of businesses. Ensure a smooth installation process with the Quick Installation Manual available for download for free from our website. Get comprehensive product information and step-by-step instructions for easy setup.

Share
Download
background image

Hitachi Ultrastar 15K147 SCSI Hard Disk Drive Specification

149

Hitachi Confidential

 

•

Reserve

This service action does not conflict with a successfully established persistent reservation. 

If the Initiator has not previously performed a Register service action, the command with this service action is 
rejected with 

Reservation Conflict

 status. 

If the key specified in the Reservation key field is already registered but the Initiator that registered the key is differ-
ent from the Initiator requesting the command, the Target returns 

Reservation Conflict

 status. 

If persistent reservation that is being attempted conflicts with persistent reservation that is held, the Target returns a 

Reservation Conflict

 status.

The established persistent reservation applies to all commands received after the successful completion of the com-
mand.

•

Release

This service action may conflict with a successfully established persistent reservation.

If the Initiator requesting the command has not previously performed a Register service action, the command is 
rejected with a status of 

Reservation Conflict

.

If the key specified in the Reservation key field is already registered but the Initiator that registered the key is differ-
ent from the Initiator requesting the command, the drive returns a 

Reservation Conflict

 status.

The drive returns 

Good

 status when a key specified in Reservation key field is not found.

When the key is found but the scope is different from the registered scope or the type is different from the registered 
type, the command is rejected with 

Check Condition

 status. The sense key is set to 

Illegal Request

 and the additional 

sense data is set to 

Invalid Release of Active Persistent Reservation

.

•

Clear

If the indicator requesting the command has not previously performed a Register service action, the command is 
rejected with a status of Reservation Conflict. 

•

Preempt and Abort

This service action does not conflict with a successfully established persistent reservation.

If the Initiator requesting the command has not previously performed a Register service action, the command is 
rejected with a status of 

Reservation Conflict

.

If the key specified in the Reservation key field is already registered but the Initiator that registered the key is differ-
ent from the Initiator requesting the command, the drive returns a 

Reservation Conflict 

status.

Even if the key specified in the Service Action Reservation key field is not registered, the drive makes new persistent 
reservation without preempting if it does not conflict with an existing persistent reservation.

When the key is registered but reservation for the key is nothing yet and the new persistent reservation does not con-
flict with an existing persistent reservation, the drive makes new persistent reservation and clears the key and all 
commands from the Initiator that was registered the key.

When the key specified in the Service Action Reservation Key is cleared even if a reservation for the key is nothing 
yet, the drive makes UNIT ATTENTION condition for the Initiator that was registered the key. The sense key is set to 

Unit Attention

 and the additional sense data is set to 

Reservation Preempted

.

When PERSISTENT RESERVE OUT command with this service action completes successfully, the Generation 
counter is incremented.

•

Register and Ignore Existing Key

This service action does not conflict with a successfully established persistent reservation.

The key specified in the Reservation Key field is ignored, and the key specified in the Service Action Reservation 
Key field is registered as the new key, regardless of whether or not a key was already registered. 

Summary of Contents for HUS151414VL3600


































































































































































































































































































































Reviews:

No comments

Related manuals for HUS151414VL3600

IBM Storwize V7000 Quick Installation Manual preview
Storwize V7000
Brand: IBM Pages: 102
Quantum FIREBALL PLUS AS 10.2 Product Manual preview
FIREBALL PLUS AS 10.2
Brand: Quantum Pages: 162
Supero SUPERSERVER 6027TR-H71FRF User Manual preview
SUPERSERVER 6027TR-H71FRF
Brand: Supero Pages: 118
7-BIT Wicher CD32 User Manual preview
Wicher CD32
Brand: 7-BIT Pages: 4
Lifetime 1034594 Assembly Instructions Manual preview
1034594
Brand: Lifetime Pages: 20
IBM TotalStorage Network Attached Storage 300G User Reference preview
TotalStorage Network Attached Storage 300G
Brand: IBM Pages: 86
Seagate Expansion 750GB Quick Start Manual preview
Expansion 750GB
Brand: Seagate Pages: 1
Hama Save2Data SecureKey Operating Instructions Manual preview
Save2Data SecureKey
Brand: Hama Pages: 38
Fastora Fastora NAS T8 Specifications preview
Fastora NAS T8
Brand: Fastora Pages: 2
VIOLIN SYSTEMS 7700 Installation Manual preview
7700
Brand: VIOLIN SYSTEMS Pages: 208
Overland Storage LTO-5 Quick Start Manual preview
LTO-5
Brand: Overland Storage Pages: 4
Overland Storage NEO S-Series Service Manual preview
NEO S-Series
Brand: Overland Storage Pages: 45
Overland Tandberg LTO Series User Manual preview
LTO Series
Brand: Overland Tandberg Pages: 84
LaCie 301891 User Manual preview
301891
Brand: LaCie Pages: 22
uRAGE 00186058 Operating Instructions Manual preview
00186058
Brand: uRAGE Pages: 45
Western Digital Caviar Green WD10EACS Specifications preview
Caviar Green WD10EACS
Brand: Western Digital Pages: 2
ASUSTOR AS7110T Memory Installation Manual preview
AS7110T
Brand: ASUSTOR Pages: 11
Seagate Technology ST1000VT001 Product Manual preview
ST1000VT001
Brand: Seagate Technology Pages: 36

Brands by name

Popular brands

Load more brands