Page 3
version 1.0
Auxiliary Connector J6
7.
Mounting Orientation
The drive may be installed horizontally or Vertically. Provide adequate airflow to cool drive. Use 4
Mounting screws(6x32UNC). Maximum screw penetration 3.8mm(0.15 in) into drive.
8.
For a 68-pin drive attach the power cable and ensure that one end of the SCSI cable
is connected to the host adapter. The cable should be terminated
. (
The 80-pin drive is plugged
into the server backplanes and requires no cables
)
9.
Ensure that all cables are connected and properly routed.
10.
Turn on your computer.
•
If the system boots be sure the drive is recognized. If it is turn off the computer and replace the cover.
Proceed to install your operating system.
•
If your system does not boot up, turn off your computer and check all connections and settings. Turn
on and boot the system.
•
If the system fails to boot, turn off your system. Contact the Hitachi GST Technical Support Center for
assistance – www.hitachigst.com
