Prepar
ation
Installing the LCD
TV
Using The
F
eatures
T
roub
leshooting
Specifications
Using
The DTV F
eatures
Introducing the LCD
TV
12
Cable TV ( CATV ) Connection
Ŷ
The RF switch ( not included ) is required to provide two inputs ( A and B ). Setting the RF
switch to position A allows viewing of all unscrambled channels by using the TV channel keys.
Ŷ
Setting the RF switch to position B allows viewing of all scrambled channels via the converter /
descrambler by using the converter channel keys.
Ŷ
A 75-ohm coaxial cable connector is built into the set for easy hookup.
When connecting the 75-ohm coaxial cable to the set, connect the 75-ohm cable into the
ANT. terminal.
Ŷ
Some cable TV companies offer premium pay channels. Since the signals of these
premium pay channels are scrambled, a cable TV converter/descrambler is generally
provided to the subscriber by the cable TV company.
This converter/descrambler is necessary for normal viewing of scrambled channels. ( Set your TV to
channel 3 or 4, typically one of these channels is used. If this is unknown, consult your cable TV company. )
For more specific instructions on installing cable TV, consult your cable TV company. One possible method
of connecting the converter/descrambler provided by your cable TV company is shown in the diagram
below.
2-set signal
splitter
(not included)
Cable TV Line
A
IN
B
OUT
RF switch
( not included )
Cable TV converter/
descrambler
( not included )
VHF / UHF IN
Connecting a TV Cable or an Antenna
