--- 21 ---
Mounting the cylinder
Insert the concave side of the Slide Sleeve
[31]
into the Cylinder
[30]
. Insert the assembly of the Striker
[28]
and the O-ring (I.D 27.2)
[29]
into the Cylinder
[30]
(Fig. 21).
Fig. 21
Slide sleeve
O-ring
Striker
Cylinder
Mounting the piston
Insert the Piston Pin
[34]
into the 8-mm dia. hole (marked) of the Piston
[35]
and the Connecting Rod
[36]
then press-fit it. Mount the O-ring (I.D 27.2)
[33]
to the Piston
[35]
. At this time, do not protrude the Piston Pin
[34]
from the outside of the Piston
[35]
. Move the crank pin of the Crank Shaft
[42]
to the bottom dead center
and insert the piston ass'y into the Crank Shaft
[42]
from the cylinder case of the Cylinder Crank Case
[47]
.
Mount the Retaining Ring for D10 Shaft
[37]
using a retaining ring puller (Fig. 20).
Fig. 20
Piston pin
Crank shaft
Cylinder crank case
Retaining ring
D8 hole
Mark
Connecting rod
Piston
O-ring
Crank pin portion
Concave
Summary of Contents for H45MRY
Page 36: ......
