Installation
1/ Configure your computer network
.
•
The Internet Protocol properties should be set to:
- obtain an IP address automatically
- obtain DNS server address automatically
Please consult your computer system instructions in order to
configure the Internet Protocol properties as needed because
the configuration process & information varies depending on
you computer OS and version. Also: this is for Ethernet
configuration only; USB configuration slightly differs, please
contact technical support for more information.
2/ Connect your equipment
•
As described on the 'Connexion Map' page
•
Due to auto configuration mode, the modem may self-reboot, so please wait until
the DSL and VOIP lights are both green and steady (about 5 mn)
3/ Login procedure
•
The login information will normally be auto-configured in your modem. In a few
cases, it will be asked but only for once when you first open Internet Explorer (or
similar Web browser) and try to visit a Web site (e.g.,
www.google.com
).
•
In this case, enter your ADSL user name and password (as mentioned on the first
page of this doc) and validate.
3
