GR4000 Quick Start Guide, Revision 1 - Preliminary
QSGGR4K00-10 5794047-1X
51
(2) Input configuration information.
Set the interface mode to 8k.
GR1(config)#
system interface_mode 8k
…
Set an interface mode.
!GR1(config)#
NOTE
The mark “!” will be shown at the beginning of a prompt if you change configuration information.
However, you can delete this mark by saving configuration information you changed.
(3) Check the contents of configuration information you set.
Check the interface mode you set by displaying configuration information.
!GR1(config)#
show system
…
Show system information.
system name "GR1"
system interface_mode 8k
!GR1(config)#
(4) Save the information you set.
Save the configuration information you set.
!GR1(config)#
save
…
Save configuration information.
GR1(config)#
NOTE
The mark “!” at the beginning of a prompt can be deleted by saving configuration information.
(5) Exit the edit mode.
Exit the edit mode of configuration information.
GR1(
config
)#
exit
…
Exit the edit mode of configuration information.
GR1#
Display of system information