GS4000 Quick Start Guide, Revision 3
QSGGS4KX10-00 5794092-2X
61
(3) Complementary functions
You can simplify the input of parameters or file names by entering the [Tab] key.
Also, you can display a list of parameters available by entering this key.
●Simplification of the input of parameters/file names
You can show a list of commands or parameters starting with the characters you’ve just input by entering
the [Tab] key in the middle of inputting them.
GS1
(
config
)#
li
[Tab]
…
Input just
“
li
”
and enter the
[Tab] key.
line link-aggregation
…
A list of commands starting with
“
li
”
is shown.
GS1
(
config
)# lin
…
In this case, the characters
“
lin
”
are complemented.
●Showing a list of parameters available
You can show a list of parameters you can use after the commands/parameters you’ve just input by
entering the [Tab] key with a apace after commands/parameters.
GS1
(
config
)#
line line0
[Tab]
…
Enter the [Tab] key with a space after
“
line ethernet0/0
”
.
10gigabit_ethernet ethernet oc192pos
10gigabit_ethernet_wan gigabit_ethernet oc48pos
GS1(config)# line line0
(4) Help function
You can search a command or parameter you can designate by entering the [?] key.
Also, you can know the meaning of each command/parameter.
Do the following operation if you want to show a list of parameters you can use after “show ip” and know
the meaning of each parameter.
GS1
>
show ip [?]
…
Enter the [?] key with a space after
“
show ip
”
.
arp Display the information of ARP
cache Display the conditions of policy route group information
dhcp Display the information of DHCP server or client program
entry Display a detail information of a particular route
interface Display the information of interface
local Display summarized policy routing information
ospf Display the information of OSPF protocol
policy Policy routing commands
rip Display the information of RIP
route Display routing information
route-filter Display the filter result of a route
static Display the information of STATIC
list of parameters meaning of each parameter
GS1> show ip
A list of parameters you can use
after "line line0".
