GS4000 Quick Start Guide, Revision 3
QSGGS4KX10-00 5794092-2X
45
(4) Save configuration infromation.
Save the configuration information you input into a file.
!GS1(config)#
save
…
Save configuration information.
GS1(config)#
NOTE
Configuration information will be saved into a file currently opened if you skip inputting a file
name. In the example above, information will be saved into an active file on memory. You can save
configuration information into a spare file you designated by inputting its file name after the
“save” command. For details about a spare configuration information file, see the GS4000
Software Manual Configuration Settings CLI-CLI Type 1 Hierarchical Input Format-.
NOTE
The mark “!” at the beginning of a prompt can be deleted by saving configuration information.
(5) Log out of GS4000.
Log out of GS4000 according to the following procedures.
GS1(
config
)#
exit
…
Exit from the edit mode.
GS1#
quit
…
Get back to the mode of general users.
GS1>
logout
…
Log out of GS4000.
BSDI BSD/OS 3.1
login:
Now, you’ve finished all the necessary settings.
If you need to edit configuration information;
See
“
8.2 Editing of Configuration Information
”
.
If you need to confirm operation status;
Skip to
“
6. Confirmation of Operation Status
”
.
