Basic Operations
GR2K-GA-0008
3-5
Rev. 1.00
3.3.6
Check the Configuration You Set by Displaying its Information
3.3.7
Save the Configuration Information Into the Configuration File
3.3.8
Close the Configuration File
3.3.9
Return to the Administrator Mode
*
Note: Although you can skip this operation, check if the configuration information
edited is correct to avoid the trouble at the time the GR2000-B starts running.
For the display style, refer the examples of each command execution.
*
Note: The configuration information is saved into the file currently opened in case that
you skip inputting a file name. Therefore, in this example, the information is
saved into the operative configuration file on memory. You can save the
information into any preparative configuration file designated by inputting a file
name.
FRQILJ
VKRZ
OLQH/$1HWKHUQHW
OLQH/$1HWKHUQHW
LS/$1^
`
LS/$1^
`
VWDWLF^
GHIDXOWJDWHZD\
`
FRQILJ
The configuration information is
displayed by the show command.
The information displayed
as a result.
The "(config)#" prompt is shown
after the information is displayed.
FRQILJ
VDYH
FRQILJ
The edited configuration information is saved into the configuration
file you are working on using the save command.
The
!
prompt is deleted after the configuration information is saved.
FRQILJ
FORVH
FRQILJ
The configuration file being edited is closed by the
close
command.
FRQILJ
H[LW
The edit is finished using the
exit
command, and the
system returns to the administrator mode (
#
prompt).
