-5-
2. Working performance per charge
Type of work
Maker
Model
Working time per charge (min)
0
0.5
1.0
1.5
2.0 2.5
HITACHI
G 14DSL
G 14DL
C
Grinding
Pressing load:
Its own 15 N
Outside diameter of the
depressed-center
wheel:
115 mm (4-1/2”)
B
Type of work
Maker
Model
Working length per charge
0 16.4 32.8 49.2 65.6 82.0 (ft)
0
5
10
15
20 25 (m)
HITACHI
G 14DSL
G 14DL
C
Cutting
(Concrete by a
diamond cutter)
Cutting depth:
5 mm (13/64”)
B
Type of work
Maker
Model
Working quantity per charge (pcs.)
0
5
10
15
20 25
HITACHI
G 14DSL
G 14DL
C
Cutting
Rebar by a cut-off
wheel
Outside diameter of the
rebar:
10 mm (12/32”)
B
The above table shows an example of test data obtained using the battery which is standard for this tool.
As actually measured values listed in the above table may vary depending on the sharpness of the wheel,
workpiece hardness, charging condition, operator skill, etc., this data should be used as a comparative
guide only.
2.0
2.5
1.5
No diamond cutter is available
due to the special structure.
8.4
15.5
18
23
10
