Hitachi FL-701 User Manual Download

Page: 6 / 14

Lens Installation and Removal

Please be careful as the methods for lens installation/removal will differ according

to model.

■

Compatible Models

For CP-X8150, CP-WX8240, CP-X8160, CP-X8170, CP-WX8255, CP-WX8265,
CP-SX8350, CP-WU8440, CP-WU8450, CP-WU8451, CP-WU8460, CP-WU8461

Lens Replacement Procedure

1. Return the lens shift to the center position

(1) Press the

LENS SHIFT

button. The LENS SHIFT dialog will appear.

(2) Press the

ENTER

INPUT

button while the dialog is displayed to execute

the CENTERING feature, which adjusts the lens to the center. A message

dialog is displayed for confirmation.

(3) Pressing the ►button performs CENTERING.

Note

•

You can also perform CENTERING in the standby mode by pressing the

FUNCTION

and

LENS SHIFT

buttons on the control panel for 3 seconds at the

same time.

2. Turn off the projector

Turn off and unplug the projector, and allow the projector to sufficiently cool down.

3. Remove the front cover

Move and slide the front cover up while pressing the front cover from the underside and

remove the front cover from the projector.

Front cover

(upper part)

Summary of Contents for FL-701















Search results

Summary of Contents for FL-701

Reviews:

Related manuals for FL-701

Brands by name

Popular brands

Hitachi FL-701, User Manual

Search results

Summary of Contents for FL-701

Reviews:

Related manuals for FL-701

Brands by name

Popular brands