Hitachi FL-701 User Manual Download Page 2

2

Informa tion for users applicable in European Union countries

This symbol on the product or on its packaging means that your electrical and 

electronic equipment should be disposed at the end of life separately from your 

household wastes. There are separate collection systems for recycling in EU. 

For more information, please contact the local authority or the dealer where you 

purchased the product.

Operations

• Project an image as described in the Projector user's manual, and adjust the size and 

focus of the projected image.

• See the Projection Distance table in this user's manual for information on optional lens 

projection distances.

Note

• 

The distance of projection may not allow focusing on the peripheral area of the screen. 

Adjust the focus to keep the center and the peripheral area of the screen balanced.

• These specifications are subject to change without notice.

• The zoom lens may cause some distortion of the image on the screen depending on the 

zoom position.

• Distortion may appear on screen if the keystone correction (trapezoidal distortion 

correction) is overly adjusted.

• Keystone correction (trapezoidal distortion correction) may be limited with some lenses.

Notice

■ Take care of the lens.

• 

When transporting the lens, protect the lens by attaching the lens cap.

• 

Do not touch the lens to prevent fog or dirt on the lens that could cause deterioration of 

display quality.

• 

Do not touch the lens directly. Dirty lens may cause deterioration in image quality.

• 

The lens is a precision optical device. Carefully handle the lens without subjecting it to 

shocks or vibrations.

• 

When resting the lens on a surface, place the lens face down on a soft cloth.

■ Cleaning

• 

Use commercially available lens tissue to clean the lens (used to clean cameras, 

eyeglasses, etc.).

• 

Excepting for lens, use a soft cloth to clean. When excessively soiled dilute a neutral detergent in 

water, wet and wring out the soft cloth.

• Do not use detergents or chemicals other than those noted above (e.g. benzene or 

thinners).

Summary of Contents for FL-701















Reviews: