OPERATOR’S STATION
1-39
FM/AM RADIO OPERATION
1. Controls on the radio
1- Power Switch/Volume Control Knob
2- Tone Adjustment Ring
3- AM/FM Switch
4- Station Preset
5- Tuning Switch
6- Display Mode Change Switch
7- Digital Display
8- Time Set Switch
9- Set Switch
2. Tuning Procedure
(1) Manual Tuning Procedure
Repeatedly tap one of tuning switch (5) until the
desired station is reached.
Each time the tuning switch is pressed, the fre-
quency changes at an interval.
•
Tap the tuning switch (
∧
) to increase the fre-
quency.
•
Tap the tuning switch (
∨
) to decrease the fre-
quency.
Digital display (7) will return to the setting (the
clock or the frequency, whichever one is set by the
display mode change switch) approximately 5 sec-
onds after tuning switch (5) are no longer tapped or
pressed.
(2) Automatic Search Function
Press and hold one of tuning switch (5) for more
than half a second until an electronic tone is heard,
then release. The frequency display will move up to
the next higher frequency station.
•
To go up to the next higher frequency station,
press and hold the tuning switch (
∧
).
•
To go down to the next lower frequency station,
press and hold the tuning switch (
∨
).
After displaying the next frequency station, digital
display (7) will return to the setting (the clock or the
frequency, whichever one is set by the display
mode change switch) in approximately 5 seconds.
In order to deactivate the automatic search function while it
is operating (while searching the next available frequency
station), simply tap tuning switch (5) again.
If the receiving radio waves are weak, i. e. such as when
the machine is located between high rising buildings, etc.,
use the manual tuning procedure to select the desired sta-
tion.
M146-01-039
M157-01-027
Radio
7
6
5
2
1
3
4
8
9
Summary of Contents for EX1900-5
