-9-
Q1E-EP0659
4.4
Drying
1)
Wipe the probe with a single-use, fluff-free
wipe or towel to remove moisture from the surface of the probe.
2)
Dry the probe naturally in an ambient temperature between
15-30°C for a minimum of 4 hours. Alternatively the equipment
can be dried using a drying heater at a temperature of less
than 60°C.
4.5
Inspection
Inspect the equipment for any damage such as crack, scratch or
deformation. Do not use it if any damage is found.
Water
Detergent
Disinfectant
Fig.3 Immersion of the probe
Drying
