Hitachi ED-X20 and User'S Manual And Operating Manual Download

Page: 32 / 82

SETUP Menu

SETUP Menu (continued)

Item

Description

WHISPER

Using the ▲/▼ buttons turns off/on the whisper mode.

BRIGHT

NORMAL

•

When the NORMAL is selected, acoustic noise and screen

brightness are reduced.

MIRROR

Using the ▲/▼ buttons switches the mode for mirror status.

NORMAL

H:INVERT

V:INVERT

H&V:INVERT

If the Transition Detector is TURN ON and MIRROR status is

changed, Transition Detector Alarm (



) will be displayed when

projector is restarted after the power switch is turned off.

VOLUME

Using the ▲/▼ buttons adjusts the volume.

High

Low

AUDIO

Allocates the audio ports.
(1) Choose a picture input port using the ▲/▼

buttons.
(2) Select the audio port to be interlocked with

the input port using the ◄/► buttons.

•

When

is selected to an input port, any audio ports do not work

interlocking with the input port, and any items in AUDIO menu are

invalid.

#7&+1

%1/276'4

37+6

%1/276'4

58+&'1

8+&'1

#7&+1+0

Summary of Contents for ED-X20 and



















































































Search results

Summary of Contents for ED-X20 and

Reviews:

Related manuals for ED-X20 and

Brands by name

Popular brands

Hitachi ED-X20 and, User'S Manual And Operating Manual

Search results

Summary of Contents for ED-X20 and

Reviews:

Related manuals for ED-X20 and

Brands by name

Popular brands