Hitachi E-U Series, Instruction Manual, Page: 9 / 24

3. INSTALLATION
1. Lifting the Vortex Blower
To lift the Vortex Blower by crane, please review the table and illustration below.
Vortex Blower Hangar Construction Table
Model Motor Blower Proper Lifting Procedure
VB-001SE-U,
VB-002SE-U,
VB-002SE-U,
VB-004(S)E-U,
VB-007(S)E-U
No hanger No hanger By Hand
VB-019(S)E-U,
VB-030E-U
Eyebolt on the housing No hanger Use eyebolt
VB-040-E2
Motor hooks on housing
Do not use to lift
(See fig.3.1)
Eyebolt on the casing
Use eyebolt
(See fig.3.2)
VB-060-E2,
VB-080-E2
Motor hooks on housing
Do not use to lift
(See fig.3.1)
Eyebolt on the bracket
Use eyebolt
(See fig.3.2)
VB-110-E2
Motor hooks on housing
Do not use to lift
(See fig.3.1)
Eyebolt on the bracket
Eyebolt and lope
(See fig. 3.3)
NOTES:
• Use the eyebolt on the motor housing for Vortex Blower model VB-019(S)E-U and VB-030E-U.
• Use the eyebolt on the blower casing for Vortex Blower model VB-040-E2.
• Use the eyebolt on the bracket for Vortex Blower model VB-060-E2 to VB-110-E2.
• Do not use the motor hooks constructed on the motor housing. This motor hooks can break
and cause damage to the Vortex Blower.
Do not use the motor hooks.
Fig.3.1 Strictly Prohibited
- 9 -