Hitachi DZ-MV350A - Camcorder Instruction Manual Download

Page: 37 / 170

nglis

QR34642

ATTACHING BATTERY TO DVD VIDEO CAMERA/RECORDER

Fit the battery to the battery attachment
platform on this DVD video camera/recorder
and slide it upward until a click is heard.

Note

•

Make sure that the battery is in the correct orientation.

•

Make sure that the battery is securely attached:
Incomplete attachment could cause the battery to fall,
resulting in damage.

REMOVING BATTERY

After using the DVD video camera/recorder, remove the battery from it.

Slide the BATTERY EJECT switch on the bottom
of DVD video camera/recorder: The battery can
be removed.

Note

•

For safety, be sure to turn the DVD video camera/
recorder off before attaching or removing the battery.

•

Be careful not to drop the removed battery.

•

If the battery remains attached, minute level current will
flow even if the DVD video camera/recorder is off, and the
battery will discharge.

Terminal
must
face up.

Summary of Contents for DZ-MV350A - Camcorder











































































































































































Search results

Summary of Contents for DZ-MV350A - Camcorder

Reviews:

Related manuals for DZ-MV350A - Camcorder

Brands by name

Popular brands

Hitachi DZ-MV350A - Camcorder, Instruction Manual

Search results

Summary of Contents for DZ-MV350A - Camcorder

Reviews:

Related manuals for DZ-MV350A - Camcorder

Brands by name

Popular brands