5 - 5
(b)
(a)
(c)
(d)
4)
1) [N]
2) [N]
3)
(e)
2) [A]
[A] M1.7×4 (Black)
[N] M1.7×4 (Silver)
1) Tabs
(b)
(a)
(d)
(c)
(b)
3) [D]
2) [D]
(a)
1)
[D] M1.7×4 (Black)
(4) Front Block and R Block
1) Open the jack cover (c), and then remove one
screw [N].
2) Remove one screw [A] and one screw [N].
3) Remove the FRT-H/FRT circuit board (d)
from AEL-H/AEL circuit board (e) in the
direction of the arrow.
4) Remove the front block (a) from R block (b)
in the direction of the arrow.
(a) Front block
(b) R block
(c) Jack cover
(d) FRT-H/FRT circuit board
(e) AEL-H/AEL circuit board
Fig. 5-3-5
(5) Jack Cover
1) Release the two tabs, and then remove the
jack cover (a).
(a) Jack cover
(b) Front block
Fig. 5-3-6
(6) FRT-H/FRT Circuit Board, Microphone,
and Microphone Cover
FRT-H/FRT circuit board (a)
1) Disconnect the flat cable from microphone.
2) Remove one screw [D], and then remove the
FRT-H/FRT circuit board.
Microphone (b) and Microphone Cover (c)
3) Remove one screw [D], and then remove the
microphone and microphone cover from the
front case (d).
(a) FRT-H/FRT circuit board
(b) Microphone
(c) Microphone cover
(d) Front Case
Fig. 5-3-7
Disassembly and Reassembly > Disassembly
