En
g
lish
63
SWITCHING QUALITY OF STILL IMAGE (QUALITY)
You can switch the still recording quality only when using card.
1
Press the MENU button, use the
2
/
1
/
0
/
/
/
buttons to choose “Quality” on
the “Record Functions Setup” menu screen,
and then press the
button.
2
Choose the option you want, and then press
the
button.
3
Press the MENU button to end the setting.
Note
:
•
The still quality settin
g
will be stored in memory even
when the DVD video camera/recorder is turned off.
•
The quality of photos recorded on DVD-RAM is
equivalent to “FINE” on card.
RECEIVING IMAGE FROM ANOTHER DEVICE (INPUT SOURCE)
If you wish to input an image from another device to this DVD video camera/recorder, you must
first switch the setting on the DVD video camera/recorder.
Refer to the explanation starting from page 108 on how to connect the DVD video camera/recorder
to other devices or record images input from them.
The DZ-GX5060SW cannot receive any externally input signal.
1
Press the MENU button, use the
2
/
1
/
0
/
/
/
buttons to choose “Input
Source” on the “Record Functions Setup”
menu screen, and then press the
button.
2
Choose “LINE”, and then press the
button.
3
Press the MENU button to end the setting.
Note
:
The “Input Source” settin
g
will return to “CAMERA”
whenever the DVD video camera/recorder is turned off.
It is recommended that you use “FINE” when recording vital images (p. 149 “SIZE AND
QUALITY OF PHOTOS”).
Setting
Content
On-s
c
reen display
CAMERA
Usually select this option.
No display
LINE
To input ima
g
e from another device
L IN
