Hitachi DZ-GX5060SW, Instruction Manual

Page: 132 / 153

En
g
lish
132
Cannot combine.
Deselect PHOTO
scenes. Select only movies and combine them.
80
Cannot combine. Select
multiple scenes. Select a ran g e of at least 2 scenes to be combined, and then
combine them.
80
Cannot delete scenes. This may occur when scene that was edited for division, etc. is to
be deleted.
Combine the divided scenes, and then delete them.
78, 80
Cannot divide scene. This messa g e will appear when the scene is extremely short
because division, etc. was repeated.
79
Cannot execute.
Chan
g e display
cate g ory to ALL.
This messa g e will appear if you attempt to combine or move
scenes with “Cate g ory: VIDEO or PHOTO” specified. 103
Cannot execute.
Unselect multiple
scenes. Division or chan g e in thumbnail was executed when multiple
scenes were selected. 74
Cannot read disc.
Check dirt/crack/both-
sides contrary/inserted
correctly. Error occurred while the disc was bein g reco g nised. Make sure
that there is no scratch or dirt on disc, that the surface/back of
disc is not reversed, and that the disc is firmly pushed a
g ainst the
turntable. See *3 and *4 on pa g e 137.
9, 37
CANNOT RECORD
PHOTOS • This messa g e will appear when the PHOTO button is pressed
with the power switch set to “ ! ”.
• You cannot record still ima g e on DVD-RW/DVD-R/+RW disc
(recordable of still ima g es from PC). Use DVD-RAM disc to
record still ima g es.
22, 149
CANNOT RECORD
VIDEO This messa g e will appear when the REC button is pressed with
the power switch set to “ ” or “ " ”.
41
Cannot replace
thumbnail on PHOTO
scenes. The thumbnail of a still cannot be chan g ed.
Select a movie. 83
Cannot select any more
scenes. The maximum number of selectable scenes is 999.
86
CANNOT SLEEP
MODE The DVD video camera/recorder can enter the sleep/restart
status only from the recordin
g pause status. The followin g
conditions apply:
• No disc or card is loaded.
• The disc or card has no remainin g space.
• The power switch is set to “ ” with a DVD-RW (VF-mode)/
DVD-R/+RW.
42
CARD ALMOST FULL Remainin g space is only enou g h to record less than 10 stills.
Delete unnecessary stills and try the card, or use another card.
78, 99, 149
Card error has
occurred. • The card terminals may be dirty: Wipe off dirt, and try the card
a
g ain, or use another card.
• Data other than still ima g e may be included: Use another card.
24
Card error has
occurred.
Format the card now? Was the card formatted on PC? Was formattin g interrupted
midway? When usin g the card on this DVD video camera/
recorder, choose “YES” and format it.
98
Message Cause & Troubleshooting
Referen c e
page