En
g
lish
136
*1
•
This message may also appear when dirt adheres to disc. If this message appears when a recorded
disc is recognised immediately after it is inserted, do not repair the disc; remove it and then use the
provided disc cleaning cloth to clean off the dirt before using it.
•
This message may also appear when condensation occurs. In this case, do not repair the disc; turn
the DVD video camera/recorder off, wait until it dries out, and then turn it on again.
•
If the repair message appears when you turn the DVD video camera/recorder on from off with a
disc loaded after recording on it, choose repair.
•
If the repair message appears when recording and playback are normally possible with another
disc – and no condensation occurs and the disc is not dirty – choose repair.
Scenes over limit.
Cannot divide scene.
The number of entered scenes has reached the limit that can be
entered.
Delete several scenes.
91, 95
Stop processin
g
.
The
button was pressed to stop processin
g
of multiple scenes.
—
There was no scene
which can be deleted.
This messa
g
e will appear if you try to delete multiple scenes on
Disc Navi
g
ation when all the selected scenes have been locked.
Release the lock on scenes before executin
g
deletion.
78, 85
This disc cannot be
used. Please replace
disc.
A disc that cannot be used on this DVD video camera/recorder
has been loaded. Check the type of disc.
24
This disc is finalized.
Finalize is not required.
This messa
g
e will appear if you press the FINALIZE button with a
finalised DVD-RW/DVD-R/+RW loaded in this DVD video camera/
recorder. Finalisin
g
the disc is not necessary.
101
This disc is recorded by
the NTSC system.
Please replace disc.
This DVD video camera/recorder can use only discs recorded on
the PAL system. A disc recorded on the NTSC system cannot be
used on this DVD video camera/recorder.
—
UNFORMAT DISC
The disc is not initialised or it is dama
g
ed.
If this messa
g
e appears, be sure to initialise the disc on this DVD
video camera/recorder before usin
g
it.
Reinitialisin
g
even a disc used on this DVD video camera/
recorder may be necessary (initialisin
g
will erase all recorded
contents on disc). If this messa
g
e appears, try to initialise the
disc. If the same messa
g
e still appears, the disc may be
dama
g
ed: Use another disc.
98
See *2 on pa
g
e 137.
9
Use AC adapter/
char
g
er.
Finalisation is not possible when the DVD video camera/recorder
is powered by a battery: Use the AC adapter/char
g
er for
finalisation.
25, 101
Use AC adapter/
char
g
er.
Turn off power.
Scene cannot be repaired when the DVD video camera/recorder
is powered by a battery.
If the AC adapter/char
g
er is unavailable in handy place, remove
the disc, use the opposite side, or use another disc. To repair the
removed disc, insert the disc into the DVD video camera/recorder
afterwards, and connect the AC adapter/char
g
er.
25
Write protected.
Check card.
A card with the erase prevention switch locked is inserted: Unlock
the switch.
24
Write protected.
Check disc.
•
A write-protected disc is inserted.
•
Release the write-protect usin
g
the Disc Navi
g
ation menu.
99
Message
Cause & Troubleshooting
Referen
c
e
page
