English
134
Changing Setting of Demonstration
This DVD video camera/recorder is equipped with a demonstration function.
The default at purchase time is “Auto”, which will automatically start the demonstration approx. three
minutes after the DVD video camera/recorder is turned on.
Use the following procedure if you wish to view the demonstration immediately or change the setting
to “Off”.
1
Press the MENU button.
2
Choose “Initial Setup”,
“Demo Mode”, and
then press the
button.
3
Press the
2
or
1
button to choose the
desired option, and then press the
button.
Press the MENU button again: The menu
screen will disappear.
To stop the demonstration midway, press the
button.
The demo mode will end when the DVD
video camera/recorder is turned off or the
DISC EJECT button is pressed down.
Note
:
• You can press the DISC NAVIGATION button to stop
demonstration midway: The Disc Navigation screen
will appear.
• If you choose “Auto”, the demonstration will not start if
a disc is loaded with the power switch set to “
!
” or
“
”, or a card is loaded with the power switch set to
“
"
”.
• While the demonstration is being given, the recording
indicator will blink.
Auto: To start demonstration approx. 3
minutes after turning the DVD video
camera/recorder on.
Off:
To set demonstration to off.
Start:
To start demonstration immediately.
O f f
S t a r t
ENTER
RETURN
Demo Mode
R e s e t
Re c o r d LED
Powe r S ave
B e e p
L a n g u a g e
A u t o
I n i t i a l S e t u p
RAM
RAM
