– 13 –
EN
Connection to an Audio System
R
L
ANALOG
AUDIO OUT
L
R
Stereo system
NOTES
• If you use the Euro A/V (scart) cable, it is not necessary to connect the analog audio cable.
• If output Dolby Digital audio, connect to a Dolby Digital decoder, and set “DOLBY DIGITAL” to “BITSTREAM” for audio out-
put in the setup mode. (See page 26)
• If output MPEG audio, connect to a MPEG decoder, and set “MPEG” to “BITSTREAM” for audio output in the setup mode.
(See page 26)
• Unless connected to a Dolby Digital decoder or an MPEG decoder, set “DOLBY DIGITAL” and “MPEG” to “PCM” for audio
output in the setup mode. Playing a DVD using incorrect settings may generate noise distortion, and may also damage the
speakers. (See page 26)
• The audio source on a disc in a Dolby Digital 5.1 channel surround format cannot be recorded as digital sound by an MD or
DAT deck.
COAXIAL
COAXIAL
DIGITAL
AUDIO OUT
AUDIO
DVD/VCR
Audio Input Jacks
Digital Audio Input
Jacks
Analog Audio Out
Digital Audio Out
• Method 1
DVD/VCR + Stereo system
• Method 2
DVD/VCR + Dolby Digital decoder or MPEG decoder
Dolby Digital decoder
or MPEG decoder
Method 1
Method 2
CONNECTIONS
H97H1BD(EN).qx4 04.10.27 5:11 PM Page 13
