--- 18 ---
(c) Mounting the Dust Guard [31]
Mount the Dust Guard [31] to the Magnet [30] so that the protrusion of the Dust Guard [31] aligns with
the notch of the Magnet [30]. Hold each part securely as the Dust Guard [31] may be attracted to the
Magnet [30] by the strong magnetic force (see Fig. 9).
(b) Mounting the Shift Arm [20] and the Shift
Knob [39] (See Fig. 11.)
Mount the Shift Arm [20] to the protruded
side of the Rear Case [18] facing its bent
portion forward. At this time, insert the
protrusion of the Shift Arm [20] into the hole
of the Rear Case [18] and check that the
protrusion is inserted into the groove of the
Slide Ring Gear [21] that is mounted in the
Rear Case [18] (see Fig. 6).
Insert the Shift Arm [20] into the groove of
the Shift Knob [39] facing "LOW" indication
on the Shift Knob [39] backward.
Notch
Protrusion
Fig. 10
Fig. 9
[31]
[30]
(6) Reassembly of the drive unit
(a) Fit the protrusion of the Motor Spacer [28] in the concave portion of the Rear Case [18] engaging the
pinion of the Armature [29] with Planet Gear (A) Set (4 pcs.) [25]. Turn it fully clockwise viewing from the
rear of the Armature [29] (see Fig. 10).
Protrusion
Protrusion
Pinion
Fig. 11
[20]
[39]
[28]
Concave
portion
Concave
portion
[18]
[25]
(c) Mounting the Click Spring [9] and the Clutch Dial [4] (See Fig. 12.)
Mount the Click Spring [9] to the Front Case [8].
1
2
Protrusion
Top view
Side view
Indication "LOW"
Groove portion of slide ring gear
Concave
portion
1
