--- 15 ---
10-1-2. Reassembly
Reassembly can generally be carried out as the reverse of the disassembly procedure, with some items to be
noted as follows.
(1) Reassembly of the power supply unit
Perform wiring according to the wiring diagram (Fig. 2). Pay attention to the connecting direction of the
internal wires and the terminals.
(Note) Be careful in handling the FET and the internal wires of the DC-Speed Control Switch [41] as they are
apt to be broken at their roots.
Fig. 2
(2 pcs.)
[32]
Internal wire (red)
[6]
Internal wire (black)
Protrusion
Notch
[40]
[41]
[46]
[40]
Internal wire
FET
Fig. 3
[7]
[8]
(2) Reassembly of the clutch mechanism
Mount the Thrust Plate [7] and the Spring [6] to the Front Case [8] in order (see Fig. 3). At this time, align the
notch of the Thrust Plate [7] with the protrusion of the Front Case [8].
