Hitachi DH 36DL, Technical Data And Service Manual, Page: 4 / 54

1
Change lever
Shift knob
“Ro hammering” “Rotation only”
“Hammering only
“POWER”
mode
(Powerful
hammering
force)
<Drilling holes in concrete>
Suitable for drilling holes
of 5 mm or larger
diameter with high motor
power (speedy and
efficient drilling)
<Drilling holes in steel and wood>
Suitable for drilling holes
in steel and wood
speedily with high motor
power
<Demolishing concrete>
Suitable for demolishing
hard materials such as
concrete with high motor
power
“SAVE”
mode
(Suppressed
hammering
force)
<Drilling holes in concrete>
Suitable for drilling holes
of 4.8 mm or smaller
diameter with suppressed
motor power (preventing
the bit from being bent)
<
Nonusable
>
Do not use the tool for
high-load operation in
this mode because the
motor power is
suppressed. Otherwise,
the motor may be burnt
out.
<
Demolishing blocks
>
Suitable for demolishing
brittle materials such as
blocks and bricks with
suppressed motor power
*: Based on our own research
Lightweight and compact *
The Models DH 25DL, DH 25DAL, DH 36DL and DH 36DAL are substantially lighter than the current
models in weight thanks to the adoption of the new lithium-ion batteries Types BSL 2530 and BSL 3626.
They are lighter than B by over 300 g in weight.
Maker HITACHI
Model DH 25DL DH 25DAL DH 36DL DH 36DAL
B
Overall length (mm) 322 322 322 322 367
Overall height (mm) 192 192 214 214 221
Overall width (m) 93 93 93 93 96
Weight (kg) 3.5 3.6 3.9 4.0 4.3
Large number of holes can be drilled per battery charge *
The working capacity per single charge of the Model DH 36DAL is 1.5 to 2 times higher than B thanks to the
highly efficient motor and the high-capacity battery. For details, refer to "4. Per charge working capacity
comparisons" on page 8.
Fastest drilling speed in the class *
The drilling speed of the Models DH 25DL, DH 25DAL, DH 36DL and DH 36DAL are about 1.1 times higher
than B thanks to the efficient transmission of the hammering energy. For details, refer to "2. Drilling speed
comparisons" on page 6.
Switchable hammering force mechanism increases
working efficiency
Each of the Models DH 25DL, DH 25DAL, DH 36DL and DH 36DAL is equipped with the same mechanism
as the current DH 24 series cordless rotary hammers to switch the hammering force between "POWER"
mode and "SAVE" mode for proper adjustment of the hammering force.
SELLING POINT DESCRIPTIONS