Hitachi DH 36DL Technical Data And Service Manual Download Page 3

Page: 3 / 54

CONTENTS

Page

SELLING POINT DESCRIPTIONS -----------------------------------------------------------------------------------------1

SPECIFICATIONS --------------------------------------------------------------------------------------------------------------3

COMPARISONS WITH SIMILAR PRODUCTS--------------------------------------------------------------------------5

1. Specifications comparisons ------------------------------------------------------------------------------------5

2. Drilling speed comparisons ------------------------------------------------------------------------------------6

3. Chiseling performance comparisons-------------------------------------------------------------------------7

4. Per charge working capacity comparisons -----------------------------------------------------------------8

PRECAUTIONS IN SALES PROMOTION--------------------------------------------------------------------------------9

1. Safety instructions -----------------------------------------------------------------------------------------------9

2. Precautions requiring particular attention during sales promotion --------------------------------- 11

REFERENCE MATERIALS------------------------------------------------------------------------------------------------- 11

REPAIR GUIDE---------------------------------------------------------------------------------------------------------------- 12

1. Precautions in disassembly and reassembly (DH 25DL, DH 36DL) ------------------------------- 12

2. Precautions in disassembly and reassembly (DH 25DAL, DH 36DAL) --------------------------- 17

3. Precautions in servicing (DH 25DL, DH 25DAL, DH 36DL, DH 36DAL) -------------------------- 24

4. Precautions in disassembly and reassembly of battery charger ------------------------------------ 25

STANDARD REPAIR TIME (UNIT) SCHEDULES-------------------------------------------------------------------- 26

Assembly diagram for DH 25DL

Assembly diagram for DH 25DAL

Assembly diagram for DH 36DL

Assembly diagram for DH 36DAL

Summary of Contents for DH 36DL























































Search results

Summary of Contents for DH 36DL

Reviews:

Hitachi DH 36DL, Technical Data And Service Manual, Page: 3 / 54

Search results

Summary of Contents for DH 36DL

Reviews: