manualshive.com logo in svg

Hitachi DH 24PM, Technical And Service Manual

Share
Download
Hitachi DH 24PM Technical And Service Manual Download Page 4

--- 1 ---

1. PRODUCT NAME

Hitachi Rotary Hammer, Model DH 24PM

2. MARKETING OBJECTIVE

The new Model DH 24PM is a 3-mode type rotary hammer based on the Model DH 24PC3 rotary hammer drill. It

can provide 3 modes of operation, "Rotation and hammering," "Rotation only" and "Hammering only."

In addition, the Model DH 24PM is equipped with a quick-release tool retainer that requires only two steps to

switch between the drill bit holder for use with SDS-plus bits and the drill chuck holder for drilling holes in steel

and wood easily and safely.

The main features of the Model DH 24PM are as follows:

(1) The tool retainer requires only two steps to switch between the drill bit holder for use with SDS-plus bits and

the drill chuck holder for drilling holes in steel and wood easily and safely.

(2) Class-top drilling speed

(3) More comfortable and frisky drilling

(4) Long service life and high durability thanks to the internal pressure adjustment mechanism

(5) Non-slip double-layer molded handle and gear cover

3. APPLICATIONS

(1) Rotation and hammering function (When the drill bit holder is mounted)

   Drilling anchor holes

Drilling holes in concrete, tile, brick and similar materials

(2) Rotation only function (When the drill chuck holder is mounted)

     Drilling holes in steel and wood

Tightening and loosening machine screws and wood screws

(3) Hammering only function (When the drill bit holder is mounted)

Light-duty chiselling of concrete

Groove digging and edging

[Typical applications]

 Air conditioning ................................... Installation of air conditioners, water coolers and heaters, and air ducts

 Piping and plumbing ........................... Installation of gas, water, and sanitary facilities

 Electrical work ..................................... Installation of light fixtures and various electric appliances

 Interior decoration ............................... Installation of seating, display stands and partitions

 Other civil engineering, construction and repair work

Summary of Contents for DH 24PM

















































Reviews:

No comments

Brands by name

Popular brands

Load more brands