Hitachi DH 24PM Technical And Service Manual Download

Page: 23 / 48

--- 20 ---

Lock plate

B portion is separated.
(Rotation stopped.)

Second pinion

Second gear

Cylinder

Pinion sleeve

C portion is separated. (Tool turns free.)

Locking claw of second pinion

Fig. 9

(4) Neutral (Fig. 9)

The Model DH 24PM has a neutral mode used for positioning a tool such as a flat chisel. Adjust the change

lever to a position halfway between "Hammering only" ( mark) and "Rotation and hammering" ( marks).

Engagement between the pinion sleeve and the second pinion ( B portion in the figure), and between the lock

plate and the locking claw of the second pinion ( C portion in the figure) is released and the cylinder rotates

freely. Simply turn the grip to adjust the tool to the desired position.

8-4. Caution when Using "Rotation Only"(No Hammering) Function

The drill chuck holder (standard accessory) is required for drilling holes in wood or metal materials. The change

lever of the Model DH 24PM permits changeover among "Rotation only," "Rotation and hammering" and

"Hammering only" functions. Be sure to adjust the change lever to "Rotation only" for drilling holes in wood or

metal materials by means of the drill chuck holder. If the change lever is adjusted to "Rotation and hammering" or

"Hammering only" for such operation, no hammering force will be transmitted but the drill chuck may be damaged.

Please caution the customers about the above.

Summary of Contents for DH 24PM

















































Search results

Summary of Contents for DH 24PM

Reviews:

Related manuals for DH 24PM

Brands by name

Popular brands

Hitachi DH 24PM, Technical And Service Manual

Search results

Summary of Contents for DH 24PM

Reviews:

Related manuals for DH 24PM

Brands by name

Popular brands