--- 32 ---
(7) Mounting the bit holder or the chuck holder
The bit holder or the chuck holder can be mounted by the disassembly procedure in reverse. How to mount
the Lock Grip
[11]
is as follows. Mount the Spring
[10]
and the Lock Ring
[12]
to the Lock Grip
[11]
and align
the Spring
[10]
with the notch of the Bit Holder
[13]
. At this time, place the Bit Holder
[13]
on a suitably-sized
support for easy mounting. Mount Washer (B)
[9]
. Push in the Lock Grip
[11]
turning in the arrow direction on
the Lock Grip
[11]
as shown in Fig. 29 and fix it with the Retaining Ring for D25 Shaft
[8]
. If it is impossible to
mount Washer (B)
[9]
to the fixing position of the Retaining Ring for D25 Shaft
[8]
, remove Washer (B)
[9]
and
check that the Sping
[10]
is inserted to the proper position. (Fig. 19)
Support
Fig. 28
Bit Holder
[13]
or
Chuck Holder
[29]
Fig. 29
Spring
[10]
Lock Grip
[11]
Notch
Lock Grip
[11]
Spring
[10]
Lock Ring
[12]
Fig. 30
Second Shaft
[63]
Reciprocating Bearing
[65]
First Gear
[66]
Piston
[53]
(8) Mounting the piston
Mount the Piston
[53]
as shown in Fig. 30.
Striker
[51]
Inner Cover Ass'y
[56]
Summary of Contents for DH 24PM
Page 48: ......