manualshive.com logo in svg

Hitachi DH 24 PF, Technical Data And Service Manual, Page: 3 / 43

Share
Download
Hitachi DH 24 PF Technical Data And Service Manual Download Page 3

Page

CONTENTS

1. PRODUCT NAME .............................................................................................................................. 1

2. MARKETING OBJECTIVE ................................................................................................................ 1

3. APPLICATIONS ................................................................................................................................. 1

4. SELLING POINTS ............................................................................................................................. 2

4-1. Selling Point Descriptions ................................................................................................................... 3

5. SPECIFICATIONS ............................................................................................................................. 4

5-1. Specifications ...................................................................................................................................... 4

5-2. Optional Accessories .......................................................................................................................... 5

6. COMPARISONS WITH SIMILAR PRODUCTS ............................................................................... 10

6-1. Specification Comparisons ............................................................................................................... 10

6-2. Drilling Speed Comparison ............................................................................................................... 11

6-3. Chiseling Performance Comparison ................................................................................................. 12

7. PRECAUTIONS IN SALES PROMOTION ...................................................................................... 13

7-1. Handling Instructions ........................................................................................................................ 13

7-2. Caution Plate .................................................................................................................................... 13

8. REFERENCE MATERIAL ................................................................................................................ 14

8-1. Lubrication ........................................................................................................................................ 14

8-2. Tool Structure .................................................................................................................................... 14

8-3.  "Three-Mode" Changeover Mechanism ........................................................................................... 18

8-4. Drill Bits ............................................................................................................................................. 21

8-5. Chuck Section ................................................................................................................................... 22

8-6. Dust Collector (B) ............................................................................................................................. 22

9. PRECAUTIONS IN DISASSEMBLY AND REASSEMBLY ............................................................. 24

9-1. Disassembly ..................................................................................................................................... 24

9-2. Reassembly ...................................................................................................................................... 28

9-3. Tightening Torque ............................................................................................................................. 30

9-4. Wiring Diagram ................................................................................................................................. 31

9-5. Internal Wire Arrangement and Wiring Work .................................................................................... 31

9-6. Insulation Tests ................................................................................................................................. 32

9-7. No-load Current Value ...................................................................................................................... 32

10. STANDARD REPAIR TIME (UNIT) SCHEDULES ........................................................................ 33

Assembly Diagram for DH 24PF

Summary of Contents for DH 24 PF












































Reviews:

No comments