Hitachi DH 20V, Handling Instructions Manual

Page: 6 / 37

5
English
SPECIFICATIONS
Voltage (by areas)* (110V, 220V, 230V, 240V)
Input* 460W
No-load speed 0-900/min
Full-load impact rate 3500/min
Capacity: concrete 20 mm
steel 13 mm
wood 15 mm
Weight (without cord and side handle) 3.1 kg
* Be sure to check the nameplate on product as it is subject to change by areas.
STANDARD ACCESSORIES
(1) Case (Molded plastic) ................................................ 1
(2) Side handle ................................................................. 1
(3) Stopper ........................................................................ 1
(4) Dust cup ...................................................................... 1
Standard accessories are subject to change without
notice.
Drill bit (square shank)
OPTIONAL ACCESSORIES (sold separately)
1. Drilling anchor holes (ro striking)
䡬
Drill (square shank) (Cannot be attached to the model exclusively intended for the SDS bit.)
Outer Total Outer Total Outer Total
diameter length diameter length diameter length
5.0 mm 110 mm 8.5 mm 200 mm 16.0 mm 350 mm
5.0 mm 150 mm 9.0 mm 150 mm 17.0 mm 200 mm
5.5 mm 110 mm 12.0 mm 150 mm 19.0 mm 150 mm
6.5 mm 110 mm 12.0 mm 200 mm 19.0 mm 350 mm
6.5 mm 150 mm 12.7 mm 150 mm 20.0 mm 350 mm
7.0 mm 150 mm 14.0 mm 150 mm
8.0 mm 110 mm 15.0 mm 150 mm
8.0 mm 150 mm 16.0 mm 200 mm
䡬
Drill bit (taper shank) and taper shank adapter (Cannot be attached to the model exclusively intended for
the SDS bit.)
Drill bit (taper shank) Taper shank adapter
Cotter